Products Used EquipmentHeavy Duty Feeder Stacker for Sale

Heavy Duty Feeder Stacker for Sale

Description

Heavy Duty Feeder Stacker for Sale

888CSE has a Heavy Duty Feeder Stacker for Sale, located NSW.

This Electric Powered Heavy Duty Feeder Stacker for sale is mounted on a mobile (wheeled) trailer chassis, with electric drive for the ultimate efficiency and portability with the lowest cost of operation.

  • The unit is New / Unused. (Plated 2018).
  • 2 year / 4000 Hour component warranty included (Parts only, subject to OEM T&C’s)
  • 2 x 22kW Motors.
  • Up to 1000tph feed rate, depending on material type and characteristics, operator efficiency and site logistics.
  • Variable speed drive on feeder.
  • Starter Panel included.
  • 1050mm feeder belt and 1050mm main belt.
  • Can be fed with CAT988 / WA600 class loaders into the 11.5cu.m AR Lined hopper.
  • Up to 5.9m high discharge (adjustable) with 15m onboard conveyor.
  • Photo and GA are attached.

Reduced Price:- AUD$309,000.00+GST = $339,900.00 ex works Mittagong area (NSW). Note this feeder is considerably more heavy duty and higher specification than anything “so called equivalent” you might find elsewhere.

For more information or to arrange an inspection (Mittagong Area – NSW), please contact us or call Melissa on 0447 888028. Offered strictly subject to prior sale with formal offer and detailed T&C’s.

Detailed Specifications are listed below.

8×16 PFH Superior Industries Heavy Duty 8ft wide x 16ft long hopper (2.5m wide x 4.9m long) with variable speed HD 1050mm wide belt conveyor under hopper and 50ft long HD 1050mm discharge conveyor in lattice frame construction, all on a portable chassis.
Hopper Construction and Size 8′ x 16′ top opening. (2.5m x 4.9m) Fabricated with 6mm plate, reinforced around top and bottom. Bottom opening tapered, with I-beam breaker bar. Hopper Liner 10mm AR Welded in at OEM. Hopper Skirting. 8″ channel frame conveyor, mounted on angle rail and removable from under hopper. Reinforcing ribbed bands on exterior of hopper – Front wall vertical. Sheet metal side guard runs full length BOTH Sides of hopper for protection of belt feeder. Front section folds up for transport.
8×16 HD Belt Feeder 42″ wide x 20′ long (1050mm belt by approx. 6m centres)
Grizzly / Reject Grid Not Included
Hopper Capacity Approx. 11.5 cu.m (struck capacity)
Drive Class I head end
Motor 22kW, 1500rpm, 415v, 3Ph, 50Hz (Locally source Metric motor, inverter duty)
Gear reducer Dodge TA7-315-H25 Gearbox with V-belt drive with drive guard
Capacity 350-1000 MTPH (Max) of material @ 1.6te/cu.m, 25° surcharge with recommended max lump size of 178mm with 90% fines.
Belt speed Variable, from 25 to 100 fpm (0.125 to 0.5m/s)
Superior Idlers CEMA C, 5″ dia. Rolls, sealed for life ball bearings. Flat carrier 7” spacing impact.
Chassis Frame Construction Heavy duty wide flange beam.
Axle Tandem, with dual 11×22.5 tires
Landing Legs Hydraulic Legs with 12 V pumping unit
Fifth wheel 2″ bolt-in 5th wheel King pin
Brakes Complete air brake package
Lights LED (Red) brake and amber directional lights
Mud flaps Included
Conveyor Components  
Drive pulleys 16” diameter CEMA, 10mm herringbone lagged drum
Tail pulleys 16” diameter, MD Chevron® pulley
Shafts Turned and polished
Bearings HD Dodge Bearings
HD Lattice Discharge Conveyor 42″ wide x 50′ long c/w Rock guard entire length of conveyor
Take ups Screw type
Belting 4 ply 6mm + 2mm covers (I/C belt length on SN plate)
Frame 24″ deep truss
Belt splice Factory vulcanized belt splice on both conveyors
Belt Scrapers Superior Exterra Primary on both belt feeder and discharge conveyor
Drive Class I head end
Motor 22kW, 1500rpm, 415v, 3Ph, 50Hz (Locally source Metric motor, inverter duty)
Gear reducer Dodge TA4-207-H25 c/w Backstop. V-belt drive with drive guard.
Belt speed 350 fpm (1.75m/s)
Capacity 1000 MTPH (Max) of material @ 1.6te/cu.m, 25° surcharge with recommended max lump size of 178mm with 90% fines.
Superior Idlers CEMA C, 5″ dia. Rolls, sealed for life ball bearings. 35° Trough on 4′ spacing
Returns CEMA C, 5″ dia. Rolls, sealed for life ball bearings on 10’ spacing
Conveyor fold manual top folding head section
Additional Specifications  
Power Supply 415 v / 3 ph / 50 hz
   
Electrical Starter / control Panel with 2 x 22kW starters, 1 x VSD for feeder. Additional starter included for 7.5kW Hydraulic Powerpack. All electrical work, including panel, wiring, compliant with AS3000.
Remote control Not included
Guarding Guards may not meet all local codes; customer is responsible to have plant inspected. Additional guards / all changes to OEM specifications are chargeable at extra cost.
Serial plate Dated with 2018 serial number
Hydraulic Powerpack Not Included (Optional Extra) $POR
Hydraulic raise Hydraulic rams only for customer supplied Hydraulic Powerpack / $POR
Idler Paint Powder coated Superior Orange
   
Owner’s Manual

 

(1) hard copy in English included for operation and maintenance, with electronic delivery of detailed parts manual.
Paint One coat primer, one coat Superior dark Grey.
Transport This unit is “site towable” with 50mm town pin , lights and brakes which may be used in some territories, subject to local permits but is NOT LICENCED for Road Towing. (bolt in – tow pin can be changed to 90mm $POR)
  specifications may be subject to change without notice.